Discover the Ortec Environnement Lillebonne agency

The Ortec Group has know-how and proficiency in a broad variety of techniques to offer tailor-made industrial cleaning solutions. From the one-off service to the overall “Clean Factory” agreement, our teams have expertise in a wide range of techniques and processes, whether manual or mechanised, for your industrial site. You can be confident in the reliability and performance of your installations in the long term, as well as in the integrity of your processes.

Aspiration of powdery materials:
For on-site industrial cleaning, our specialist teams carry out pumping and aspiration of powdery materials, i.e. when the material is dry, in powder or dust form.

Hydrodynamic cleaning from 150 to 2,500 bars:
Recognised as an ecological and efficient process, our team offers manual or customised mechanical cleaning as a solution suited to all kinds of soiling on your industrial site:

• Cleaning HP (High Pressure) 150 – 300 bars
• Cleaning VHP (Very High Pressure) 300 – 600 bars
• Cleaning UHP (Ultra High Pressure) 600 – 2,500 bars

Aeroscrubbing :
For our parts cleaning, surface renovation and descaling operations, we use the air scrubbing technique. This low-pressure surface treatment is more environmentally friendly and is an alternative to chemical pickling. This technique can be used on metal, wood, stone and plastic surfaces.

Cryogenic cleaning :
Using cold as a cleaning agent, the dry ice blasting process allows our teams to effectively treat all types of equipment and difficult surfaces.

Chemical cleaning :
Our team of experts at your industrial site will assist you with a wide range of chemical cleaning techniques: degreasing, deoxidation, decontamination and passivation.

Mechanical cleaning :
Our team of experts uses customised manual or mechanised cleaning solutions to meet the specific needs of your installations / equipment.

Pumping and cleaning of basins :
We carry out pumping and dredging operations for your basins, from one-off services to global contracts, according to well-established processes adapted to your installations.

Pumping, cleaning and degreasing of capacities : (tanks, pits, grease traps, augers, etc.).
Our pumping, cleaning and degreasing services are carried out using the most efficient and innovative techniques (suction unit, hydrocureur, hydrodynamic and mechanized methods) in order to ensure the durability of your installations. The extracted materials will be monitored for reconditioning.

Pumping of hazardous products :
To meet your needs in terms of maintenance and cleaning of your production tools, we carry out pumping operations for hazardous products in compliance with the environmental and safety standards in force.

With its industrial experience, the Ortec Group is your partner of choice for comprehensive industrial maintenance, whether predictive, preventive or curative, in order to maintain and optimise the performance of your production tools. From execution to the global management of an outsourced function, our versatile teams adapt to build a solution suited to your needs in order to guarantee maximum availability of your facilities at the best cost.

Overall or specific maintenance of production installations :
On your industrial site, our local team will assist you with global industrial maintenance, and can offer expertise in many specialist areas for production facilities.

Handling / lifting :
Under optimal safety conditions, our expert teams carry out the most sensitive handling and lifting operations on your industrial sites. With risks fully controlled by our specialists, all the conditions are met for a responsive and reliable service.

Preventive maintenance :
In order to accompany you in the face of constantly evolving maintenance issues, we set up preventive maintenance plans or carry out punctual preventive maintenance operations on your installations in order to ensure their longevity and guarantee business continuity.

Unit modification and construction work :
We provide revamping and construction of units in order to meet your challenges of process creation or evolution. Piping, boilermaking, metal structures, etc. we guarantee the maintenance and/or optimization of the performance of your production tools.

Cleaning, vacuuming and emptying work :
As part of our industrial maintenance services, we provide suction, pumping and cleaning work for all your capacities (liquid or powder).

Transfer, deconstruction and dismantling :
Industrial transfer, deconstruction and dismantling are part of the life cycle of industrial facilities. Our experts in the field will assist you with the preparation of operations, by providing studies and monitoring implementation.

Removing an oil tank is a mandatory operation when you want to change or upgrade your heating system. Our teams accompany you in this process: from advice to the evacuation of the oil tank.
Due to the nature of the products contained (fuel oil, deposits/sludge, gas), this operation must be carried out by trained and qualified professionals in order to control all risks for people, property and the environment.

Different sensitive operations are essential before proceeding with the removal of your tank:
– Emptying, degassing and cleaning
– Neutralization
– Dismantling and removal
– Waste management
– Certificate of conformity

Ortec’s local teams carry out all of these operations while controlling the risks and complying with regulations.

Discover all the details on MaPrimeRénov’, available to all owners, whether they are occupants or lessors, as well as to co-ownerships for work in common areas.

The network of local branches of the Ortec Group can offer preventive or curative services for the diagnosis, installation, maintenance and renovation of your sanitation networks and their structures. Our professional team will work tirelessly to meet your needs, whether they are occasional, urgent or recurrent, 24 hours a day, 7 days a week.

Dredging / pumping of networks and structures :
Sanitation networks and installations require regular maintenance. Our expert teams will handle maintenance, pumping, dredging and unblocking work on piping of all diameters.

Drainage, maintenance, servicing, and inspection of equipment :
Our team will assist you in the draining, maintenance, servicing and inspection of your equipment: septic tanks, oil separators, grease containers, lifting stations, fuel tanks, reservoirs and pools, swimming pools, filters, dry risers (fire safety), etc.

Hydrocarbon separator :
Our maintenance, pumping, cleaning and waste management services for oil separators enable you to keep your installation in optimal working order and to comply with current environmental standards.

We have been an industrial partner for 30 years, and our versatile team can design tailor-made solutions and bring together all its areas of professional expertise to successfully carry out unit shut-downs at your industrial site. You will have access to the best experts to oversee this large-scale project with the aim of making the equipment available quickly and optimising your production capacity, whether it be: a planned shut-down to check the condition of your equipment and carry out maintenance, modernisation, or extension or cleaning work.

Work planning :
We support you in the management of your shutdowns, right from the operations planning phase. By methodically optimizing the work phasing and potential co-activities, we reduce the overall process interruption time.

Platinization/Unplatinization :
The installation, removal or operation of metal shutters is a dangerous operation with risks of leakage, air ingress or product splashes. In order to carry out these operations with the necessary level of safety and reliability, our platinizing and de-plating services are provided by trained and authorized professionals and comply with strictly defined operating procedures.

Degassing, inerting of circuits or units :
The degassing and inerting operations enable you to control the risks of accidents and to secure your circuits, capacities or units with the highest level of technical requirements.

Disassembly and reassembly of equipment :
Our dismantling and reassembly services for equipment (columns, bundles, piping, pumps, etc.) are carried out according to proven know-how to meet all current safety standards and take into account the presence of pressure or residual energy within them.

Removal and handling :
We perform deposit and handling operations of all types and volumes with the preservation of your facilities and equipment as a priority. Designed with our customers, each service is adapted to your needs, respecting costs and deadlines and benefits from all the necessary tests and trials.

Pipe and Boilermaking Repairs :
Carried out in compliance with codes, standards and regulations with the objective of “O leakage on restart”, our piping and boiler room repairs are carried out in synergy with other activities mobilized in situ according to proven methods.

Preparation for technical inspections and testing :
We accompany you in the preparation of the tests and trials in order to qualify the device or system for a new cycle.

(Re-)startup assistance :
We provide you with support and assistance during the inspection and control phase prior to the restart of your installations. In this way, we make sure that your installations are returned to service in an optimal manner.

From collection to transportation, delegated management, consolidation or pre-treatment through to treatment and recovery, the Ortec Group can help you with innovative solutions adapted to your needs. With a branch near you, we can handle all stages of waste management, whether ordinary or hazardous, whatever the deposit, and will be able to provide you with the appropriate solutions.

Collection and transportation :
Our team is ready to meet your needs for the collection and transportation of liquid and solid waste, in compliance with environmental regulations. To do this, we can obtain containers and manage them, as well as collect and transport waste to the appropriate facilities.

“Clean Factory” Agreement :
Created in 1995 by the Ortec Group, the “Clean Factory” agreements are designed by our specialist teams for the overall management of your site’s waste. From one end of the chain to the other, you benefit from solutions that meet environmental and regulatory standards, to reduce your waste at the source and recycle it efficiently.

Dans le contexte de la crise sanitaire Covid-19, le Groupe Ortec se mobilise pour répondre à vos actions de désinfection. Nos équipes de proximité accompagnent les groupes industriels, les PME/PMI, les administrations et collectivités locales afin de garantir un usage pérenne des bâtiments, entrepôts, infrastructures, unités de production, entreprises, locaux ou encore parties extérieures.

Le Groupe Ortec, soucieux de la santé et de la sécurité de ses équipes et des équipes de ses clients, a mis en place l’ensemble des dispositifs de désinfection spécialisés dans le respect le plus strict des règles sanitaires et environnementales. Durant les opérations de désinfection, nos équipes ont mis en place une analyse de risque spécifique ainsi que des modes opératoires adaptés au contexte :

• Formation dédiée au Covid-19 pour notre équipe d’intervention
• Sensibilisation spécifique pour chaque lieu d’intervention
• Solution de contrôle pour une mise au travail en sécurité
• Solution de contrôle pour une traçabilité des missions de désinfection
• Intervention uniquement pour nos équipes portant les équipements de sécurité adaptés
• Sécurisation de l’ensemble des zones traitées afin d’éviter l’exposition aux personnes non autorisées

Désinfection par pulvérisation à jet HP :
Dans le cadre des traitements de surfaces importantes, la désinfection par pulvérisation à jet Haute Pression (HP) est préconisée. Nos équipes interviennent sur tout type de surface : sols, voirie, postes de garde, mobilier urbain, entrepôts, convoyeurs, etc. La solution virucide est pulvérisée à l’aide d’un hydrocureur muni d’un pistolet HP. Nos équipes sont présentes à vos côtés pour vous accompagner dans votre démarche. Nous nous adaptons à chacune de vos attentes en fonction des contraintes d’intervention.

Désinfection par nébulisation :
Pour la désinfection par nébulisation, nos équipes d’expert répandent un brouillard de vapeur dans un lieu afin de disperser des microgouttelettes d’une solution virucide sur toutes les surfaces touchées. Les sols, murs, surfaces vitrés, rampes, interrupteurs peuvent être désinfectés du coronavirus. Nos équipes réalisent cette action à partir d’un poste fixe ou mobile.

Désinfection par pulvérisation :
Notre équipe de proximité est à vos côtés pour réaliser des interventions de désinfection par pulvérisation d’une solution virucide. Cela concerne les surfaces, sols et points de contact potentiellement contaminés par le coronavirus.

Désinfection par chiffonnage :
La désinfection par chiffonnage avec une solution virucide est utilisée pour les petites surfaces et matériels électriques et/ou électroniques : pupitres commande, claviers, outils communs, bureaux, rampes, interrupteurs, etc. Notre équipe est présente à vos côtés pour répondre à votre demande spécifique dans le cadre de la crise du Covid-19.

Gestion des déchets :
L’ensembles des déchets solides générés par les activités de désinfection (chiffons, masques, gants, combinaisons…) sont pris en charge par notre équipe selon les réglementations et protocoles en vigueur afin de supprimer tout risque de contamination.